Ait Insulation Tester Supplier & Distributor in Vadodara India

Insu 10 Insulation Tester

Product Details

Brand Name	Rish
Temperature Coefcient	<0.1% per °C
Operating Temp.	-20°C...+40°C (full range) -20°C...+60°C (upto 100M )
Storage Temp.	-25°C to +65°C
Relative Humidity	90% RH at 40°C max.
Scale Length	47 mm
Overflow Display	Bar with triangle
EMC immunity	IEC 61326-1:2012, Table A.1

Features:
Test Voltages 50V/ 100V/ 250V/ 500V/ 1000V
Test voltages from 50V to 1000V can be selected for Insulation Resistance measurement. It covers all insulation tests up to 1000V.

Insulation Resistance Measurement
The instrument is capable of measuring insulation resistance from 10 KOhm ...999 MOhm.

Hands-free continuity testing
Continuity testing (0-10 with acoustic signal) can be done without pressing the test button. In addition to the display function, an acoustic signal can be activated which sounds if the adjustable limit value is violated.

Voltmeter
Instrument measures voltages > 25V ... 600 V AC/DC.

Automatic discharge for capacitive circuits after test Measurement
Capacit...

Features:
Test Voltages 50V/ 100V/ 250V/ 500V/ 1000V
Test voltages from 50V to 1000V can be selected for Insulation Resistance measurement. It covers all insulation tests up to 1000V.

Insulation Resistance Measurement
The instrument is capable of measuring insulation resistance from 10 KOhm ...999 MOhm.

Hands-free continuity testing
Continuity testing (0-10 with acoustic signal) can be done without pressing the test button. In addition to the display function, an acoustic signal can be activated which sounds if the adjustable limit value is violated.

Voltmeter
Instrument measures voltages > 25V ... 600 V AC/DC.

Automatic discharge for capacitive circuits after test Measurement
Capacitive devices under test, such as cables and windings that get charged during the test are discharged by the tester.

Live circuit detection
Displays presence of voltages > 25V irrespective of function selected.

Pre-selectable measurement time for Insulation Resistance Measurement
In normal course, the insulation test terminates and the measured insulation resistance value remains on display for 2 sec after the test key is released. With the Pre-selectable measurement time feature, the insulation test continues and the measured value remains on the display for the pre-determined time. Pre-selectable time: 10 sec - 5 min.

Pre-selectable limit checks (Go/ No-go option) for MOhm
An acoustic signal can be generated when the measured value of insulation resistance falls below an adjustable limit value.

Lead resistance null facility
The instrument provides a facility to compensate the resistance of the leads for an accurate measurement of low resistance.

Storage of MIN/MAX values
In addition to the display of the actual measured value, the minimum or maximum value can constantly be updated or stored.

Storage Memory for last 50 readings
The instrument provides a facility to store and recall 10 values in each of the 5 ranges of insulation resistance measurement.

Blown fuse indication
The display FUSE points to a blown fuse.

Stop Watch
This function allows you to measure elapsed time up to 1 hour.

Auto-power off function
The instrument turns off automatically, if any of the keys or the instrument turns off automatically, if any of the keys or the selector switch have not been activated for about 10 minutes in insulation range and 5 minutes in other ranges or can be switched to continuous operation.

Protective holster for rough duty
A holster of soft rubber with tilt stand protects the meter against damage in the case of shock and drop.

Low Resistances Measurement (0.01Ohm... 99.9 Ohm)
Low resistances can be measured up to 99.9Ohm. There are two measuring ranges for Low W: 9.99Ohm and 99.9Ohm.

Yes! I am interested

Insu 20 Insulation Tester

Product Details

Brand Name	Rish
Battery	6 x 1.5 V cells IEC LR6 non-rechargeable cells
Fuse	500 mA(F) / 440 H.B.C. 10kA min (32mm x 6mm)
Temp. Coefficient	<0.1% per °C
Storage Temp	-25 °C to ++65 °C
Relative Humidity	90% RH at 40°C max.
Coltage Measurement	AC (Sine), 50/60 HZ

Analog + Digital Display (Log scale for Insulation Measurement)
The Analog scale for insulation resistance measurement is logarithmic in nature which gives the dynamic performance of an analog insulation tester. The Analog scale is linear for low ohm and voltage measurement.

User Selectable Backlit Display
The instrument is provided with user selectable backlit for taking measurements in dark areas/poor lighting conditions.

Connector jack for External Mains Adapter (Optional)
The instrument can be operated from mains supply (230V AC) instead of batteries using an external mains adapter (230V AC/9V DC, 500mA (4.5VA) isolated)

Test Voltages 50V/100V/250V/500V/1000V
Test voltages from 50V to 1000V can be selected for insulation resistance measurement....

Analog + Digital Display (Log scale for Insulation Measurement)
The Analog scale for insulation resistance measurement is logarithmic in nature which gives the dynamic performance of an analog insulation tester. The Analog scale is linear for low ohm and voltage measurement.

User Selectable Backlit Display
The instrument is provided with user selectable backlit for taking measurements in dark areas/poor lighting conditions.

Connector jack for External Mains Adapter (Optional)
The instrument can be operated from mains supply (230V AC) instead of batteries using an external mains adapter (230V AC/9V DC, 500mA (4.5VA) isolated)

Test Voltages 50V/100V/250V/500V/1000V
Test voltages from 50V to 1000V can be selected for insulation resistance measurement. It covers all insulation tests up to 1000V.

Insulation Resistance Measurement
The instrument is capable of measuring insulation resistance from10kOhm…2GOhm.

Low Resistances Measurement (0.01Ohm... 99.9 Ohm)
Low resistances can be measured up to 99.9Ohm. There are two measuring ranges for Low Ohm : 9.99Ohm and 99.9Ohm.

Hands-free continuity testing
Continuity testing (0-10Ohm with acoustic signal) can be done without pressing the test button. In addition to the display function, an acoustic signal can be activated which sounds if the adjustable limit value is violated.

Voltmeter
Instrument measures voltages >25V … 600V AC/DC

Automatic discharge for capacitive circuits after test measurement
Capacitive devices under test, such as cables and windings that get charged during the test are discharged by the tester.

Live circuit detection
Displays presence of voltages >25V irrespective of function selected.

Blown fuse indication
The display FUSE points to a blown fuse.

Pre-selectable measurement time for Insulation Resistance Measurement
In normal course, the insulation test terminates and the measured insulation resistance value remains on display for 2 sec after the test key is released. With the Pre-selectable measurement time feature, the insulation test continues and the measured value remains on the display for the pre-determined time. Pre-selectable time: 10 sec - 5 min.

Pre-selectable limit checks (Go/ No-go option) for MOhm / GOhm
An acoustic signal can be generated when the measured value of insulation resistance falls below an adjustable limit value.

Lead resistance null facility
The instrument provides a facility to compensate the resistance of the leads for an accurate measurement of low resistances.

Storage of MIN / MAX values
In addition to the display of the actual measured value, the minimum or maximum value can constantly be updated or stored.

Storage Memory for last 10 readings
The instrument provides a facility to store and recall 10 values in each of the 5 ranges of insulation resistance measurement, continuity and resistance measurement.

Stop Watch
This function allows you to measure elapsed time up to 1 hour.

Auto-power off function
The instrument turns off automatically, if any of the keys or the selector switch have not been activated for about 10 minutes in insulation range and 5 minutes in other ranges or can be switched to continuous operation.

Protective holster for rough duty
A holster of soft rubber with tilt stand protects the meter against damage in case of shock and drop.

Brand Name	Rish
Ambient Temperature	+ 23 C ± 2K
Relative Humidity	45 to 55%
Measured Quantity Frequency	50Hz ± 10Hz (for voltage measurements)
Operating position	Operating position
Battery Voltage	8V ± 1%
Power Supply Voltage (Mains)	Power Supply Voltage (Mains)
Standard or Storage Battery	6 nos. 1.5V single cell per IEC R20
Working range	6V to 10V

Warranty	1year
Brand Name	Rish
Relative Humidity	90% RH at 40°C max.
Scale Length	50 mm
Storage Temp.	-25°C to +65°C
Overflow Display	Bar with triangle

Rishabh Digital Insulation Tester