Thank you
Your Enquiry has been sent successfully.
Home › Megger Products
Earth Testers
Brand Name : Megger
Range : 0.01 Ω to 1 kΩ (3 digits)
Accuracy : ±3% (±2 digits)
Test Current : Up to 205 mA
Lead Null : < 10 Ω
Enquiry Now
High Resolution Earth Tester
Input : 240 Vac ±10%, 50/60 Hz, 1f, 10.5 kVA
Output : 0 to 300 A ac continuous
Test Timer : Adjustable from 1 to 10 min
Upper Unit Weight : 226 lb (102.6 kg)
GTS-300 Safety Ground And Ground Grid Test Set
Maximum jaw opening : 39 mm
Maximum jaw inner dimensions : 39 mm x 55 mm
Display : 4 + 6 digit with backlight
Battery type : 4 x 1.5 V IEC LR6/AA alkaline
DET14C and DET24C Earth Resistance Clamp Testers
Noise rejection : 40 V peak to peak
Earth voltage accuracy : 2% ±2 V
Earth voltage range : 0 - 100 V a.c.
Test voltage : 25 V or 50 V, user selectable (factory setting 50 V)
DET3TD Earth Electrode Resistance Tester
Ingress protection : P54
Display : LCD
DET3TC 3 Terminal Earth Resistance Tester
Ingress protection : IP54
Storage temperature range : -40 °C to +70 °C / -40 °F to 158 °F
EMC : In accordance with IEC61326-1
Dimensions : 203 mm x 148 mm x 78 mm (8 in x 5.8 in x 3 in)
4-Terminal Earth Resistance And Soil Resistivity Tester
Megger Digital Clamp Meter
Frequency Range : 20 - 400 Hz
Resolution : 1 Hz
Accuracy : ±0.1 % ±2 digtits
Sensitivity : 3 A
DCM340 Digital Clamp Meter
Safety rating : IEC/EN61010-1 CAT III 600 V
Temperature coefficient : 0.2 x (specified accuracy) / ºC (<18 ºC >28 ºC)
Maximum conductor size : 27 mm diameter
LCD : 2000 digit large scale readout
DCM310 and DCM320 Digital Clamp Meter
AC Voltage Detector
Voltage range : 100 V to 600 V AC 50/60 Hz
Operating Temperature : -10ºC to +50ºC
Safety rating : IEC/EN61010-1:2001-02 over voltage Cat III 1000 V
EMC : IEC/EN 61326:1998
VF1 and VF2 AC Voltage Detector
AC voltage (auto-ranging) : 90 to 600 V AC 50/60 Hz
Torch : Ultra bright LED
Power supply : 2 piles 1,5 V type AAA LR03
Dimensions : 178 mm x 26 mm
VF3 AC Voltage Detector
Electrician\'s Multimeter
Display : 2000 counts
Polarity : Automatic, positive implied, negative indicated
Over-range indication : “OL” or “-OL”
Auto power down : Approx 10 minutes
AVO®210 Electricians Multimeter
Display : 6000 counts updates 1.5/sec.
Temperature co-efficient : 0.15 x (Spec.Acc’y) / °C,<18 °C or >28 °C
AVO®410 Electrician's Multimeter
Transformer Tester
Output Voltage : 0 - 60 kV
Test Frequency : 61,8 Hz
Transformer rating : 500 VA
Weight : 17,5 kg
Semi Automatic Oil Test Set
Operating Temperature Range : -4º F to 131º F (-20º C to 55º C)
StorageTemperature Range : -58º F to 140º F (-50º C to 60º C)
Measuring Time : 8 to 20 seconds for a single-phase distribution transformer
Measurement Method : ANSI/IEEE C57.12.90 and IEC 600076.1 (2000)
Hand-held Transformer Tester
Temperature sensor resolution : 1 °C
Power supply : Line voltage 85 to 265 VAC Line frequency 50/60 Hz
Battery type : Lead acid 2 x 12 V 4 Ah,
Interface : 2 x USB type-A (Flash drive, printer)1 x USB type-B (Factory use only, or Printer)
Laboratory Oil Tester
Application field : For use in high-voltage substations and industrial environments
Operating Temperature : -20°C to +55°C (-4°F to +131°F)
Storage Temperature : -20°C to +70°C (-4°F to +158°F)
Humidity : < 90%RH, non-condensing
Multifunction Transformer and Substation Test System
Output : 8 V, 50/60 Hz
Metering : Four decade dials
Turns Ratio Range : 0.001 to 129.999
Exciting Current : 0 to 1 A (divide by 5 switch for increased resolution)
Single Phase Hand Cranked Transformer Turns Ratio Tester
Dimensions : 144 H x 304 W x 270 D mm
Weight : 5 kg
Input Frequency : 50 to 240 Hz
Max Loading : <5VA
TRS1 Transformer Ratio Standard
Low Resistance Ohmmeter
Range : 2000 mΩ, resolution 1 mΩ20,00 mΩ, resolution 0,01 mΩ
Nominal test current : 2 A nominal, with up to 2 Ω across the C terminals
Accuracy (0 ̊C to 50 ̊C) : ± 1% ± 2 digits
Display : 31/2 digit LED display
Bond Tester
Operation Temperature : -20ºC to +50°C (-4°F to +122°F)
Storage Temperature : -40ºC to +70ºC (-40°F to +158°F)
Relative humidity %RH : 5%-95%, non condensing
Pollution degree : 2
Hand-Held 200 A Micro-Ohmmeter
Temperature coefficient : < 0.01% per ºC, from 5 ºC to 40 ºC
Maximum altitude : 2000 m (6562 ft) to full safety specifications
Display size/type : Main 5 digit + 2 x 5 digit secondary displays
Battery type : 6 V, 7Ah sealed lead acid
10 A Micro-Ohmmeter With Dual Power Diagnostics
Measurement Mode : Manual, Auto, Continuous, Inductive, Undirectional
Measurement control : Fully Automatic/Manual
Measurement speed : <3s for forward and reverse current and to display average
Display : 4½ digit seven segment LED
10 A Micro-Ohmmeter With Test Storage And Downloading
Voltage input range : 100 - 240 V 50 / 60 Hz 90 VA
Dual Power 10 A Micro-Ohmmeter With Results Storage And Downloading
Other Megger Products
Brand : Megger
Operating Temperature : 5°C to +50°C (41°F to +122°F)
Storage & transport Temperature : 0°C to +60°C (32°F to +140°F)
Humidity : 5% – 95% RH, non-condensing
Mains voltage : 100 – 240 V AC, 50 / 60 Hz
Battery Voltage Monitor
Measuring Method : Dual integration mode
Measuring Function : Leakage current and load current
Display : 3,5 digit L.C.D.; max. reading of 3200
Range : 0-30 mA/300 mA/30 A/300 A (50/60Hz)
Earth Leakage Clampmeter
